Load data for 5.6 x 50 R Mag. + .224 | 35gr | Nosler Varmageddon

Recommended Powder(s): ADI AR 2207, ReloadSwiss RS 36, Vihtavuori N120

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 35gr \| Nosler Varmageddon
Manufacturer SKU:	36763
Bullet Weight:	35gr \| 2.3g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.520" \| 13.2mm
Caliber:	5.6 x 50 R Mag. load data
Case Length (l3):	1.968" \| 50.0mm
Cartridge Length (C.O.L.):	2.365" \| 60.1mm
Seated Depth:	0.123" \| 3.1mm
Shank Seated Depth:	0.123" \| 3.1mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	49313 psi \| 3400 bar
LID:	LID_B3948_C915
Last updated:	2025-01-01

Load data for 44 loads in caliber 5.6 x 50 R Mag. with .224 | 35gr | Nosler Varmageddon bullet and 22 powders such as ADI AR 2207, ReloadSwiss RS 36, Vihtavuori N120. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	90%	43526	88%	**91	100%
[ADI AR 2219]*	<<locked>>	92%	43149	87%	**45	93%
Accurate 2015	<<locked>>	96%	40379	82%	**60	95%
Alliant AR-Comp	<<locked>>	97%	36405	74%	**40	96%
Alliant Reloder-10x	<<locked>>	95%	43511	88%	**78	97%
Alliant Reloder-7	<<locked>>	88%	43903	89%	**35	97%
Baschieri & Pellagri 106	<<locked>>	92%	44150	90%	**30	95%
[Hodgdon H322]*	<<locked>>	97%	41829	85%	**09	93%
[Hodgdon H335]*	<<locked>>	92%	43091	87%	**25	92%
[Hodgdon H4198]*	<<locked>>	90%	44092	89%	**76	93%
Hodgdon TrailBoss	<<locked>>	95%	28239	57%	**57	100%
IMR 4198	<<locked>>	93%	43265	88%	**48	98%
IMR 4227	<<locked>>	83%	43221	88%	**99	99%
Lovex S053	<<locked>>	84%	43714	89%	**99	100%
Norma 200	<<locked>>	91%	43540	88%	**65	98%
ReloadSwiss RS 14	<<locked>>	95%	27673	56%	**00	100%
ReloadSwiss RS 36 👍	<<locked>>	84%	44193	90%	**48	99%
SNPE Vectan BA6 1/2	<<locked>>	87%	43366	88%	**51	100%
[SNPE Vectan SP 10]*	<<locked>>	92%	43990	89%	**45	92%
Vihtavuori N120 👍	<<locked>>	92%	44121	89%	**38	100%
Vihtavuori N130	<<locked>>	96%	42119	85%	**60	96%
[Vihtavuori N133]*	<<locked>>	97%	34925	71%	**60	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32518	66%	**96	97%
[ADI AR 2219]*	<<locked>>	87%	36463	74%	**74	90%
[Accurate 2015]*	<<locked>>	88%	30226	61%	**81	90%
[Alliant AR-Comp]*	<<locked>>	88%	27688	56%	**32	91%
[Alliant Reloder-10x]*	<<locked>>	82%	28253	57%	**45	90%
[Alliant Reloder-7]*	<<locked>>	81%	34330	70%	**79	94%
[Baschieri & Pellagri 106]*	<<locked>>	84%	34214	69%	**71	90%
[Hodgdon H322]*	<<locked>>	93%	36463	74%	**74	90%
[Hodgdon H335]*	<<locked>>	89%	38943	79%	**24	90%
[Hodgdon H4198]*	<<locked>>	84%	37057	75%	**92	90%
Hodgdon TrailBoss	<<locked>>	80%	22104	45%	**67	100%
[IMR 4198]*	<<locked>>	81%	29530	60%	**45	92%
IMR 4227	<<locked>>	81%	40451	82%	**40	98%
Lovex S053	<<locked>>	81%	39102	79%	**07	100%
[Norma 200]*	<<locked>>	81%	30748	62%	**14	93%
ReloadSwiss RS 14	<<locked>>	80%	21712	44%	**13	100%
ReloadSwiss RS 36	<<locked>>	81%	39711	81%	**43	98%
SNPE Vectan BA6 1/2	<<locked>>	81%	36347	74%	**01	100%
[SNPE Vectan SP 10]*	<<locked>>	89%	39726	81%	**47	90%
Vihtavuori N120	<<locked>>	81%	30748	62%	**07	98%
[Vihtavuori N130]*	<<locked>>	84%	28747	58%	**86	90%
[Vihtavuori N133]*	<<locked>>	93%	31618	64%	**64	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.